Knowledge base · Safety

Can I work under a car supported only by a jack?

By the Spanner and Jack teamChecked

No. Never work under, or partly under, a car that is held up only by a jack, however quick the job. Jacks can slip, tip or lose pressure. Lift the car on solid, level ground, then lower it onto correctly rated axle stands placed under strong points before any part of you goes underneath.

Safety first

A jack is for lifting, not holding. If the car is only on a jack, keep your whole body out from under it.

What the guidance says

Haynes, the workshop-manual publisher, says: "Never solely rely on the jack to support the car if working under, or near the car." It warns that the jack supplied with your car is fine for an emergency wheel change but "not to be trusted" if you want to work underneath, because it's liable to tip (Haynes, how to work under your car safely).

Haynes also advises:

  • jack only on solid, level ground, never on gravel, earth or a slope
  • never prop the car on bricks, breeze blocks or similar, which can crack without warning
  • use the handbook's jacking points and never lift under the engine, gearbox or a plastic undertray
  • once at height, place axle stands under a strong point, lock them, then lower the jack slowly so the car's weight rests on the stands

The AA's wheel-changing guide lists an axle stand as "a secondary support in case the jack fails", along with wheel chocks and the car handbook for jacking points (AA, how to change a tyre).

A safe routine

  1. Park on firm, level ground, apply the handbrake and chock the wheels that stay on the ground.
  2. Lift at the jacking point shown in your owner's handbook.
  3. Set axle stands, rated for your car, at the support points the handbook or workshop manual shows.
  4. Lower the car onto the stands and check it is stable before going under.
  5. Haynes suggests putting removed wheels under the car as an extra safety measure.

If you don't have stands, or the job needs the car lifted high, use a garage with a proper lift.

Sources

On this site